{"product_id":"nfc-tag-on-support-21x10-mm-for-vertical-integration-fdm-3d-printing","title":"NFC tag on support 21x10 mm for vertical integration FDM 3D printing","description":"\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"NFC tags for integration during 3D printing. They are develop for Lostboyslab specifically with FDM\/FFF and 3D printing and with bed temperatures up to 90 degrees. Works on Prusa, Markforged etc with PLA, PETG, Onyx etc.\\n\\nThe 21x10 mm rectangular NFC tag 213 (RFID) is aimed for embedding inside a part, a slot of 22x11x1 mm and a pause in the G code will allow adding the chip during printing. Compatible with whatt.io product lifecycle solution and enables you to add the chip after production, on packaging or on products where integration is not possible.\\n\\nDistance from active reader like a mobilephone is 30-60mm and the tag should be 3-5 mm from the surface in the plastic part manufactured. \\n\\nThe sticker is waterproof and sold in packages of 100\\n\\nProtocol ISO14443, ISO 14443A \\n\\nFrequency 13.56Mhz, 13.56MHz\\n\\nMemory 144 bytes \"}' data-sheets-userformat='{\"2\":15293,\"3\":{\"1\":0},\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":{\"1\":2,\"2\":12566463}},{\"1\":0,\"2\":0,\"3\":1},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":{\"1\":2,\"2\":12566463}},{\"1\":0,\"2\":0,\"3\":1},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":{\"1\":2,\"2\":12566463}},{\"1\":0,\"2\":0,\"3\":1},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":{\"1\":2,\"2\":12566463}},{\"1\":0,\"2\":0,\"3\":1},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":3,\"3\":1},\"15\":\"Figtree\",\"16\":11}'\u003eNFC tags for vertical integration during 3D printing. They are developed for whatt.io specifically with FDM\/FFF and 3D printing and with bed temperatures up to 90 degrees. Works on Prusa, Markforged etc with PLA, PETG, Onyx etc. The support is 3D printed separately and the 3D production files are free to use with whatt.io subscriptions.\u003cbr\u003e\u003cbr\u003eThe 21x10 mm rectangular NFC tag 213 (RFID) is aimed for embedding inside a part, a hollow slot of 22.6x13x1.6 mm and a pause in the G code will allow adding the chip during printing. The NFC tag is provided with a back support, normally made out of the same materials as it will be embedded in. The back support can be manufactured separately; all 3D production files are available in the link below, then only purchase tags \u003ca href=\"https:\/\/whattio.shop\/collections\/nfc-tags\/products\/nfc-tag-rectangular-21x10-mm-for-integration-during-fdm-fff-3d-printing-100\" title=\"NFC Tag 21x11\"\u003e21x10 Ntag 213\u003c\/a\u003e instead.\u003cbr\u003e\u003cbr\u003eDistance from active reader like a phone is 30-60mm and the tag should be 3-5 mm from the surface in the plastic part manufactured.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"NFC tags for integration during 3D printing. They are develop for Lostboyslab specifically with FDM\/FFF and 3D printing and with bed temperatures up to 90 degrees. Works on Prusa, Markforged etc with PLA, PETG, Onyx etc.\\n\\nThe 21x10 mm rectangular NFC tag 213 (RFID) is aimed for embedding inside a part, a slot of 22x11x1 mm and a pause in the G code will allow adding the chip during printing. Compatible with whatt.io product lifecycle solution and enables you to add the chip after production, on packaging or on products where integration is not possible.\\n\\nDistance from active reader like a mobilephone is 30-60mm and the tag should be 3-5 mm from the surface in the plastic part manufactured. \\n\\nThe sticker is waterproof and sold in packages of 100\\n\\nProtocol ISO14443, ISO 14443A \\n\\nFrequency 13.56Mhz, 13.56MHz\\n\\nMemory 144 bytes \"}' data-sheets-userformat='{\"2\":15293,\"3\":{\"1\":0},\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":{\"1\":2,\"2\":12566463}},{\"1\":0,\"2\":0,\"3\":1},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":{\"1\":2,\"2\":12566463}},{\"1\":0,\"2\":0,\"3\":1},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":{\"1\":2,\"2\":12566463}},{\"1\":0,\"2\":0,\"3\":1},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":{\"1\":2,\"2\":12566463}},{\"1\":0,\"2\":0,\"3\":1},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":3,\"3\":1},\"15\":\"Figtree\",\"16\":11}'\u003eChoose the amount of tags you need in the options menu; discounts are higher per tag based on the volume. For more than 10 000 tags please contact us directly for a quotation. \u003cbr\u003e\u003cbr\u003eThe sticker is waterproof and as it is intended for embedding in other parts, very durable against rough conditions.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" title=\"PART2253\/NFC whatt.io DPP w 3D production files\" href=\"https:\/\/whatt.io\/nfc-tag213-21x11-rectangula-1879\" target=\"_blank\"\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"NFC tags for integration during 3D printing. They are develop for Lostboyslab specifically with FDM\/FFF and 3D printing and with bed temperatures up to 90 degrees. Works on Prusa, Markforged etc with PLA, PETG, Onyx etc.\\n\\nThe 21x10 mm rectangular NFC tag 213 (RFID) is aimed for embedding inside a part, a slot of 22x11x1 mm and a pause in the G code will allow adding the chip during printing. Compatible with whatt.io product lifecycle solution and enables you to add the chip after production, on packaging or on products where integration is not possible.\\n\\nDistance from active reader like a mobilephone is 30-60mm and the tag should be 3-5 mm from the surface in the plastic part manufactured. \\n\\nThe sticker is waterproof and sold in packages of 100\\n\\nProtocol ISO14443, ISO 14443A \\n\\nFrequency 13.56Mhz, 13.56MHz\\n\\nMemory 144 bytes \"}' data-sheets-userformat='{\"2\":15293,\"3\":{\"1\":0},\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":{\"1\":2,\"2\":12566463}},{\"1\":0,\"2\":0,\"3\":1},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":{\"1\":2,\"2\":12566463}},{\"1\":0,\"2\":0,\"3\":1},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":{\"1\":2,\"2\":12566463}},{\"1\":0,\"2\":0,\"3\":1},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":{\"1\":2,\"2\":12566463}},{\"1\":0,\"2\":0,\"3\":1},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":3,\"3\":1},\"15\":\"Figtree\",\"16\":11}'\u003ehttps:\/\/whatt.io\/nfc-tag213-21x11-rectangula-1879\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"NFC tags for integration during 3D printing. They are develop for Lostboyslab specifically with FDM\/FFF and 3D printing and with bed temperatures up to 90 degrees. Works on Prusa, Markforged etc with PLA, PETG, Onyx etc.\\n\\nThe 21x10 mm rectangular NFC tag 213 (RFID) is aimed for embedding inside a part, a slot of 22x11x1 mm and a pause in the G code will allow adding the chip during printing. Compatible with whatt.io product lifecycle solution and enables you to add the chip after production, on packaging or on products where integration is not possible.\\n\\nDistance from active reader like a mobilephone is 30-60mm and the tag should be 3-5 mm from the surface in the plastic part manufactured. \\n\\nThe sticker is waterproof and sold in packages of 100\\n\\nProtocol ISO14443, ISO 14443A \\n\\nFrequency 13.56Mhz, 13.56MHz\\n\\nMemory 144 bytes \"}' data-sheets-userformat='{\"2\":15293,\"3\":{\"1\":0},\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":{\"1\":2,\"2\":12566463}},{\"1\":0,\"2\":0,\"3\":1},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":{\"1\":2,\"2\":12566463}},{\"1\":0,\"2\":0,\"3\":1},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":{\"1\":2,\"2\":12566463}},{\"1\":0,\"2\":0,\"3\":1},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":{\"1\":2,\"2\":12566463}},{\"1\":0,\"2\":0,\"3\":1},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":0,\"11\":4,\"12\":0,\"14\":{\"1\":3,\"3\":1},\"15\":\"Figtree\",\"16\":11}'\u003e\u003cbr\u003eProtocol ISO14443, ISO 14443A\u003cbr\u003eFrequency 13.56Mhz, 13.56MHz\u003cbr\u003eMemory 144 bytes\u003c\/span\u003e\u003c\/p\u003e","brand":"lostboyslab","offers":[{"title":"1","offer_id":54036844249411,"sku":null,"price":22.0,"currency_code":"SEK","in_stock":true},{"title":"100","offer_id":54036844282179,"sku":null,"price":1733.0,"currency_code":"SEK","in_stock":true},{"title":"1000","offer_id":54036844314947,"sku":null,"price":11976.0,"currency_code":"SEK","in_stock":true},{"title":"5000","offer_id":54036844347715,"sku":null,"price":48983.0,"currency_code":"SEK","in_stock":true},{"title":"10000","offer_id":54036844380483,"sku":null,"price":83798.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0519\/4019\/6532\/files\/NFC-suppor-white-for-vert-placement-21x11.jpg?v=1766845486","url":"https:\/\/www.lostboyslab.shop\/products\/nfc-tag-on-support-21x10-mm-for-vertical-integration-fdm-3d-printing","provider":"lostboyslab","version":"1.0","type":"link"}